Mobile Heat Exchanger Lathe
The heat exchanger, which had stray leaks due to distortion and abrasion on the gasket pressure surfaces in the connection mirror, posed a risk in terms of manufacturing even when it was connected. It is not possible to be taken to the area where the transaction will be made by logistics, and if a new order is placed, the production of the line on which it works would have to be stopped.
Heat exchanger turning can be done in empty tubes. However, lines rotate in this exchanger and there is no system that performs mobile transactions in this way. With the technology we developed specifically for the project, mobile turning and milling was completed and delivered within 2 weeks within the desired tolerances. The deformation of the gasket pressure surfaces has been eliminated. As a result of this procedure, stray leaks were prevented and all operations were carried out on-site mobile.
We eliminated plant dismantling, logistics and assembly costs and saved production time.
COKE DRUMS
Coke Drum Skirt Slot 3
DEMO - Ön Taraf Alt Delik ve Kala Kesişimi
DEMO - Front Lower Hole and Channel Intersection
Coke Drum Skirt Slot 4
DEMO - Ön Taraf Üst Delik ve Kanal Kesişimi
DEMO - Front Top Hole and Channel Intersection
Coke Drum Skirt Slot 5
DEMO - Arka Taraf Üst Delik Arka Yüz Pahı ve Kanal Arka Yüz Pahı Görüntüsü. Tüm İşlem Ön Taraftan Yapılmıştır. Hiçbir Personel Arka Tarafta Çalışmadı.
DEMO - Back Side Top Hole Rear Face Chamfer and Channel Back Face Chamfer Image. All Operations are Carried Out From the Front. Nobody did'nt Work on The Backside.
Coke Drum Skirt Slot 7
DEMO - Arka Taraf Kanalın Arka Yüz Radüs Görüntüsü. Tüm İşlem Ön Taraftan Yapılmıştır. Hiçbir Personel Arka Tarafta Çalışmadı.
DEMO - Back Side Radius View of the Back of the Channel. All operations are Carried Out From the Front. Nobody didn't Work on the Back Side
Coke Drum Skirt Slot 8
DEMO - Arka Taraf Kanalın Arka Yüz Radüsü ve Delik Pahı Görüntüsü. Tüm İşlem Ön Taraftan Yapılmıştır. Hiçbir Personel Arka Tarafta Çalışmadı.
DEMO - Back Side Radius and Bore Chamfer View of the Back Face of the Channel. All Operations are Carried Out From the Front. Nobody didn't Work on the Back Side.
Coke Drum Skirt Slot 9
DEMO - Ön Taraf, Tüpraş Tarafından Onaylanan Slot.
DEMO - Front the Slot Approved by Tüpraş.
Coke Drum Skirt Slot 11
DEMO - Ön Taraf Kanal Radüsünün Mastar ile Kontrol Görüntüsü.
DEMO - Front Control Image of the Channel Radius With Gauge.
Coke Drum Skirt Slot 12
DEMO - Ön Taraf Kanal Radüsünün Mastar ile Kontrol Görüntüsü.
DEMO - Front Control Image of the Channel Radius With Gauge.
Coke Drum Skirt Slot 13
PROJE - Kok Dram Ünitesi Etek Sacına Açılmış Slot.
THE PROJECT - Coke Drum Unit Slot on the Skirt Sheet.
Coke Drum Skirt Slot 14
PROJE - Kok Dram Ünitesi Etek Sacına Açılmış Slot.
THE PROJECT - Coke Drum Units Slot on the Skirt Sheet.
Coke Drum Skirt Slot 15
PROJE - Kok Dram Ünitesi Etek Sacına Açılmış Slot.
THE PROJECT - Coke Drum Unit Slot on the Skirt Sheet.
Coke Drum Skirt Slot 16
PROJE - Kok Dram Ünitesi Etek Sacına Açılmış Slot.
THE PROJECT - Coke Drum Unit Slot on the Skirt Sheet.
Coke Drum Skirt Slot 17
PROJE - Kok Dram Ünitesi Penetran Testi.
THE PROJECT - Coke Drum Unit Penetrant Test.