CNC Selection for your Production

The machines that are specially selected or designed for your production, positively affect your product cost and increase your competitive power. We make special-purpose CNCs that are redesigned specifically for manufacturing and with features that will reduce production costs with additions.

In order to increase the torque and features of the machine in retrofit applications, our company creates the working scenario of the machine required. Macro software of the machine working scenario is written by the team of Cnc Center. With these principles, electronic and mechanical systems are modified and renewed and provide special services for your production.

  1. The specific features of the cnc control system should be chosen correctly
  2. Axis servo motors are selected.
  3. Axis servo motor drivers are selected.
  4. Spindell servo motor and driver are selected.
  5. Targets are set with the personnel responsible for production of the requesting company.
  6. Mechanical analysis is made in line with the determined goals. Designs are made completely for the necessary interventions. Mechanical additions and software required on the machine are fulfilled.
  7. The machine should be disassembled and necessary interventions should be done in this way. Hydraulic design is done and hydraulic unit is assembled. The hydraulic piston, hydromotor and hydraulic equipment used are connected.
  8. Electric cables, communication cables, hydraulic hoses, automatic slide lubrication lines were newly used.
  9. Electric cables, communication cables, hydraulic and pneumatic hoses, automatic slide lubrication lines that have to go to the moving parts of the machine are carried by a moving cable channel.
  10. Application should be made in accordance with the work safety criteria.
  11. Machine skids should be planned to be protected against external factors.
  12. Performing the necessary tests on the mechanical parts while collecting the machine. If these tests are skipped, the ball screw, ball screw nut, ball screw shaft bearing bearings and similar malfunctions are frequently encountered.
  13. Installing and wiring the automatic slide lubrication system.
  14. The automation panel specially prepared for the machine is mounted in the most suitable and safe area.
  15. The cnc control system is installed in the safest area.
  16. Entering system parameters.
  17. Writing the macro software.
  18. Synchronizing servo motors.
  19. Gathering the entire controller in the Cnc Control unit.
  20. All connections of the automation panel and the Cnc Control unit are established. According to the working scenario of the machine, the mechanical and electronic systems are introduced to each other.
  21. Mechatronics engineering, mechanical and electronic systems, modified with manufacturing knowledge and experience, transforming it into an integrated system that integrates with each other and commissioning the machine.
  22. Quick response to possible malfunctions with Turkish definition is provided.
  23. Connecting to the machine over the internet with a computer connection, entering the macro software of the machine and preparing the necessary infrastructure for intervention Unnecessary time and service loss is prevented.
  24. Back-ups of macro software, electrical-electronics project, hydraulic scheme and necessary technical specifications.
  25. Painting the machine.
  26. All this must be done by contract.

As a result of projects carried out by unqualified teams, companies that are open to innovation are also discouraged and companies that do their job correctly suffer. Mechanical and electronic application responsibility should be undertaken together. Such projects should be for stable, efficient and long-lasting operation of the machines. For this, our company gives 2 (two) years of warranty to its projects. Mechatronics Engineering can be provided with both mechanical and electronic competence.